Syringe Pump SP2000


FNM syringe pumps are designed as a low-cost units, capable of holding 2 or 10 syringes of any make from 10μl to 50ml. These syringe pumps are ideal for delivering accurate and precise amounts of fluids for a multitude of syringe pump applications including electrospinning, infusing calibration into a mass spectrometer or reaction chamber, long term drug infusion to animals and general infusion applications.

Syringe Pump



Program Description

The programming functions of HSM series provide powerful capabilities for advanced experiments. While in program mode, the pump could perform the following tasks at a predetermined time or when prompted by a signal from an external device:

  • Start or stop pumping

  • Change pumping direction (infuse-withdraw)

  • Change flow rates

  • Pump a precise volume and stop

  • Pause operation

  • Ramp up or down flow rates 

  • Inject in a desired formula

In the “Program” mode, the above-mentioned tasks could be linked together into powerful programs to simplify your automation projects.














Max. Syringe No.

Internal Programming

Computer Control






Number of Syringe: Up to 2 (SP1000) / Up to 10 (SP2000)

Syringe Type: Plastic, metal or glass

Minimum Flow Rate: 1 μl/hr using a 10μl syringe (barrel diameter: 1 mm)

Maximum Flow Rate: 5968 ml/hr using a 60 ml syringe (barrel diameter: 29 mm)

Display: 4-line, 20-character LCD display

Nonvolatile Memory: Stores diameter, rate and settings

Input Power: 100-240V AC, 50-60 Hz.

Dimension: SP1000: 24 26 20, SP2000: 24 34 20

Weight: SP1000: 4 kg, SP2000: 5.8 kg

Warranty: 1 year

Pedal resolution per step: 10 nm

Reproducibility: 0.05%

Linear Force (Max): 17 kg (at the rate of 120 ml/hr)

Drive Motor: 1.8 Stepper Motor

Motor Drive Control: Microprocessor with 1/128 micro stepping

Number of Micro steps per one rev. of Lead Screw: 25600

Step Resolution: 0.049 μm/μstep

Pusher Travel Rate: Minimum: 0.25 m/min; Maximum: 152 mm/min

Connectors: USB (HSM Series)

Operating Temperature: 0 – 45 C

Storage Temperature: 0 – 45 C

Method of Operation: Continuous


Syringe Pump software


Typical Applications:

  • Cell injection

  • Controlled drug injection

  • Electrospinning

  • Controlled reactive injection into the reactor

  • Lab on a chip





Not for clinical uses





HOME | About us | Products | Projects | Gallery | Download | Contact