Filter Tester

FNM’s Filter Testers (FT150PA, FT200PO and FT200PS) can determine the efficiency and pressure drop of different flat sheet filter media using oil / salt aerosols or atmospheric dust. Our filter testers can be employed for testing different flat sheet media which are used for producing respiratory face masks and air filters.

Filter testers are equipped with high precision particle counter (six-channel particle sizes: 0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 µm) for counting the particles generated by oil / salt particle generator or atmospheric dust in order to calculate filtration efficiency. Additionally, this machine can calculate air permeability and pressure drop of flat sheet media automatically.
FT200PO and FT200PS use two particle counters that simultaneously count upstream and downstream particles. Data can be saved automatically and also test reports can be printed by an installed printer on the machine.
FNM’s filter testers can measure the efficiency and pressure drop of flat sheet media according to BS EN 143, BS EN 149, BS EN 779, ISO 16890, ISO 16900-3, ISO 11155-1 and ISO 5011 standards.
Note: FNM’s filter testers are designed for testing flat sheet air filter media only.

 

FT150EA

FT200PO

FT200PS

Test Modes

Pressure drop test

Air permeability test

Filtration efficiency test

Atmospheric

Oil Particles

Oil and Salt Particles

Bubble point

Optional

Optional

Standards

BS EN 149

BS EN 779

ISO 16890

ISO 16900-3

ISO 11155-1

ISO 5011

Control

PLC

HMI

7”

7”

7”

Ambient Temp.

Air flow

Flow

10 - 150 l/min

10 - 200 l/min

10 - 200 l/min

Digital control

Media Holder

Area

100 cm2

20, 50 and 100 cm2

20, 50 and 100 cm2

Sensors

Temperature

Relative humidity

Digital tank pressure control

Air Compressor

Tank pressure

1 – 8 bar

1 – 8 bar

1 – 8 bar

Pressure Drop

Pressure drop

0 – 1200 Pa

0 – 1200 Pa

0 – 1200 Pa

Digital control

Air Dryer

Air line trap

Dryer system

Particle Counter

Laser particle counter

1

2

2

Channels

six-channel

six-channel

six-channel

Channel sizes

0.3, 0.5, 1, 2.5, 5, 10 μm

0.3, 0.5, 1, 2.5, 5, 10 μm

0.3, 0.5, 1, 2.5, 5, 10 μm

Flow rate

2.8 L/min

2.8 L/min

2.8 L/min

Aerosol Generator (Oil)

Generator

Aerosol Generator (Salt)

Generator

Neutralizer

Aerosol Dilutor

Particle dilution

100:1

100:1

Type of aerosol challenge

PSL, PAO, DOP

PSL, PAO, DOP, NaCl

Printer

Optional

Optional

Respiratory Face Mask Holder

Optional

Optional

Optional

Power Supply

Single phase, 220 V, AC

 

Single phase, 220 V, AC

 

Single phase, 220 V, AC

 

Weight

About 170 kg

About 180 kg

About 180 kg

Size (cm) (Length × Width × Height)

94×92×163

94×92×163

94×92×163

Downloads

Request a Quote